Making Your First Rainbow Loom Bracelets

Rainbow Looms the Single

The Rainbow Loom has become very popular.  They are hard to find.  I was able to find one at the local Learning Express in Pembroke Pine, FL.  

I have made 16 bracelets in the last few days.  

It is easy.  

Here are the steps to make a bracelet:

1. You make sure the arrows are pointing away.
2. Then you do put the rubber bands in the colors of your choice on the looms criss cross.
3. Continue putting them all through the whole thing.
4. Turn the loom around so the arrows are pointing at you.
5. Use the hook to grab the lower elastic inside the bottom of the last loom.
6. Pull the elastic over and hook it around the next diagonal loom.
7. Keep going until all of the elastics have been hooked over to the end.
8. Then you pick up the last loom with the hook, and you pull it side to side pulling all the elastics off.
9. Then you hold on to the end that was on the hook.  Make sure you don't let go or the whole bracelet might fall apart.
10. Then you put the elastic you are holding through the see through clip.
11. Then you connect it to the thin side.
12. Then you have a rainbow loom single bracelet.